LOYALTY
PICTURE NOT AVAILABLE BUMPER PULL
STANDARD SPECIFICATIONS
SIZES AVAILABLE WITH THE
LOYALTY MODEL
2 HORSE BUMPER PULL, 14'-8"
LENGTH, (2)3500# AXLES, 15"TIRES/6 HOLE WHEELS
3 HORSE BUMPER PULL, 18' LENGTH, (2)5200# AXLES, 16"TIRES/8 HOLE WHEELS
4 HORSE BUMPER PULL, 21'-4" LENGTH, (2)6000#AXLES, 16"TIRES/8 HOLE WHEELS
BOX AREA
7' BOX HEIGHT
80" WIDE (MAXIMUM WIDTH WITH NO INSIDE FENDER WELLS)
TAPERED "V" NOSE
ONE PIECE .040 ROOF SHEET
EXTRUDED ALUMINUM TONGUE AND GROOVE WALL SLATS IN HORSE
COMPARTMENT
TWO AIR GAPS EACH SIDE IN HORSE COMPARTMENT
EXTRUDED ALUMINUM TONGUE AND GROOVE FLOOR WITH I-BEAMS ON
5" CENTERS
SIDE SHEETS .050 PRE-PAINTED WHITE WITH VHB STRUCTURAL TAPE
FULL WIDTH BUMPER UNDER REAR GATE
FULL WIDTH REAR GATE WITH TWO AIR GAPS
RV CAMPER DOOR ON CURBSIDE
UNDERCARRIAGE
RUBBER TORSION AXLES WITH E-Z LUBE SPINDLES
ELECTRIC BRAKES ON ALL WHEELS
RADIAL TIRES ON SILVER MODULAR WHEELS WITH CENTER CAPS
COUPLER AND DROP
JACK
2"
A-FRAME COUPLER (2 HORSE) 2 5/16" (3 AND 4 HORSE)
TOP WINDING SUPPORT LEG WITH REMOVABLE WHEEL
BREAK AWAY KIT
HORSE COMPARTMENT
SLANT WALL RUBBER LINED UP 48" HIGH
SPRING LOADED STALL DIVIDERS WITH SOLID ALUM HEAD SHIELD, PADS BOTH
SIDES AND
SLAM LATCH
RUMP WALL, SLANT WALL AND REAR GATE LINED UP 48" HIGH
TWO EXTERIOR AND TWO INTERIOR TIE RINGS PER STALL
5/8" THICK RUBBER FLOOR MAT
ONE, TWO WAY ALUMINUM POP-UP VENT PER STALL
DIVIDERS INSTALLED ON 40" CENTERS WITH 4' OFFSET
FRONT DRESSING ROOM
FULL
HEIGHT SLANT WALL BETWEEN DRESSING ROOM AND HORSE
COMPARTMENT
SECOND LOCATION FOR REMOVABLE SADDLE RACK
CLOTHES BAR IN NOSE, BRUSH TRAY ON SLANT WALL AND 6 BRIDLE
HOOKS
ON SLANT WALL
REAR TACK COMPARTMENT
(OPTIONAL)
LIGHTS
DOT
APPROVED LIGHTING, INCLUDING HIGH/LOW REAR STOP, TURN AND
TAIL LIGHTS, MARKER,
TAG, CLEARANCE AND REQUIRED CONSPICUITY TAPE
ONE DOME LIGHT IN FRONT DRESSING ROOM
ONE DOME LIGHT PER STALL IN HORSE COMPARTMENT